As Applied MAPS

You will need to know if your prescription fertilizer application went on correctly. We will process the files after you are finished to make sure all the settings and timings are accurate.

Below is an example of a prescription we wrote on the left. What the controller actually did is on the right. This was a TopCon X20 with a 60 foot NH3 applicator operating at 6 to 7 mph. The NH3 was applied at an angle and you can see a little bit of that pattern on the as-applied map on the right.

However, this equipment is configured perfectly and is working extremely well. Sometimes a few adjustments are required but with a few tweaks, our Prescription MAPS will look almost identical to the As Applied MAPS.